Steel sheets and strips of low carbon steel are produced by cold rolling; we deliver them in sheets in thicknesses from 0.4 to 3.0 mm, for up to 3.0 mm thick we cut them lengthwise or crosswise in many dimensions (more detailed dimensions below in the tables).
The steel strips are supplied according to EN 10130 and dimensional tolerances according to EN 10131.
They are suitable for cold forming and for products with the surfaces further modified (coating, plating).
Cold-rolled steel sheets and strips
Drawing steel DC01 - DC05
Micro-alloyed steel - with a higher yield strength for cold forming HC180LA - HC400LA
High-strength steel sheets and strips are produced by cold rolling in thickness from 0.4 to 3 mm; for up to 4.0 mm thick we cut them lengthwise and crosswise in many dimensions (more detailed dimensions in the tables below).
The steel strips are supplied according to EN 10268 and dimensional tolerances according to EN 10131.
Cold-rolled sheets of fine-grained micro-alloyed structures are used for dynamically stressed parts in vehicles, characterized by higher cold formability.
Dimensions [mm]:
|
Sheet / Bespoke |
Coil / strip |
|
|---|---|---|
|
Thickness |
0,4 - 3,0 |
0,4 - 3,0 |
|
Width |
100 - 1 750 |
20 - 1 550 |
|
Length |
100 - 6 000 |
- |
|
Inner coil diameter |
- |
508 / 610 |
|
Outer coil diameter |
- |
max. 1 800 |
Standard sheets:
|
Thickness |
Dimensions |
|---|---|
|
0,4-3,0 |
1 000 x 2 000 |
|
0,4-3,0 |
1 250 x 2 500 |
|
0,4-3,0 |
1 500 x 3 000 |
Weights of individual standard sizes and thicknesses:
|
Thickness |
Dimension 1000x2000 |
Dimension 1250x2500 |
Dimension 1500x3000 |
|---|---|---|---|
|
0,4 |
6,3 |
9,8 |
14,1 |
|
0,5 |
7,9 |
12,3 |
17,7 |
|
0,6 |
9,4 |
14,7 |
21,2 |
|
0,7 |
11,0 |
17,2 |
24,7 |
|
0,8 |
12,6 |
19,6 |
28,3 |
|
1,0 |
15,7 |
24,5 |
35,3 |
|
1,2 |
18,8 |
29,4 |
42,4 |
|
1,5 |
23,6 |
36,8 |
53,0 |
|
2,0 |
31,4 |
49,1 |
70,7 |
|
2,5 |
39,3 |
61,3 |
88,3 |
|
3,0 |
47,1 |
73,6 |
105,0 |